Quick answer
Your clients may be able to earn flexibility payments from their current or proposed commercial battery if they’re located in the National Grid Electricity Distribution (NGED) area. We offer a way for installers to continue to earn money from their sites post-installation through flexibility and wholesale market services. To find out more, please get in touch via our contact us page.
Your clients may be able to earn flexibility payments from their current or proposed commercial battery if they’re located in the National Grid Electricity Distribution (NGED) area.
As an aggregator, GridVolt offers access to these markets. Please send over details of their site and equipment so we can check which markets and flexibility services they could take part in. If you’re currently proposing a battery or a battery + solar setup, we can help you include estimates of the potential income in your sales proposal.
We also offer a virtual power plant capability, meaning for smaller sites, we can link your clients up with other sites to combine the battery power and stored electricity they don’t need for their own sites and access markets they may be too small to enter individually.
GridVolt controls the charging and discharging around your client’s electricity needs via our Energy Manager product, while companion service GridTrade handles trading through the markets available for that site.
We offer a way for installers to continue to earn money from their sites post-installation through flexibility and wholesale market services. To find out more, please get in touch via our contact us page.
What would NGED pay my client to do?
Deliver an income for your business and its clients through GridVolt. Get paid for the following:
- Taking less electricity: Your client’s battery supplies more of the electricity they need at their site during the hours NGED has arranged for a trade, meaning they take less electricity from the grid.
- Sending electricity back: The battery supplies more than the site needs and exports the surplus when NGED needs extra supply in that area.
- Charging the battery: The battery takes more electricity from the grid when NGED needs sites in that area to take more electricity, such as when generation from nearby solar or wind plants is too high.
NGED, formerly Western Power Distribution, buys these local flexibility services in specific parts of their coverage area, which includes:
- The East Midlands
- The West Midlands
- The South West of England
- South Wales
Although GridVolt is in control of your client’s batteries, we always make sure they hold back the battery power and stored electricity they need for their site, including the stored electricity your client has agreed with GridVolt to keep for power cuts. We only use what’s left over for flexibility trades, within the equipment’s operating limits.
In your proposal, you can assure your client that we won’t dip into their backup reserve or use battery power they need to keep the business running.
Can my client agree set times for NGED to use their battery?
Yes, but it’s NGED that has the flexibility here and not your client. For its long-term low-voltage service, NGED sets the days and start and finish times when your client must change how much electricity they take from or send to the grid.
NGED calls this “scheduled utilisation”.
For example, NGED may want your client’s site to take less grid electricity between 4pm and 6pm on certain weekdays. During those times, their site could be supplied by power stored in their batteries.
Before a trade, GridVolt’s software checks that the battery has enough stored electricity and can supply the power offered to NGED, measured in kW, throughout those two hours. We may get the battery to charge up before the two-hour slot, just to make sure it has enough stored electricity to cover the full two hours.
After the trade is over, GridVolt can adjust charging and discharging around the site’s own electricity needs again.
Can my client choose which days they offer their battery capacity to NGED?
Yes, provided the days and hours your client offers match when NGED needs flexibility in their area. They can’t choose any day and expect NGED to pay.
Your client could receive a payment for keeping the battery power they’ve offered ready during the hours agreed with NGED. They may also receive a further payment if NGED asks the site to take more or less electricity from the grid, or send more or less back, and the battery charges or discharges to make that happen.
NGED calls this “scheduled availability, operational utilisation – day ahead”.
The day before, NGED confirms when it needs the site to take more or less electricity from the grid, or send more or less back. The battery doesn’t have to discharge throughout every hour it’s kept ready.
GridVolt won’t enter your client into another trade if it would use up the electricity their battery needs to keep for NGED.
Can my client offer spare battery power to NGED for tomorrow?
Yes. GridVolt can offer your client’s spare battery power for particular hours tomorrow, provided NGED needs that change in their area and accepts our offer.
NGED changed how it runs its short-term market from week-ahead to day-ahead trading on 31 March 2026. Please ignore any older guidance.
We tell NGED how much more or less electricity your client’s site could take from or send to the grid, the hours they can cover and the price for doing so. If NGED accepts the offer, we arrange for the battery to charge or discharge during those hours to deliver what we’ve offered.
For example, NGED might need businesses in your client’s particular area to take less electricity from the grid between 5pm and 7pm tomorrow. During that time, we would discharge the battery so equipment on site uses more of that and less grid power.
Could NGED pay my client to respond quickly after a network fault?
Potentially. NGED also buys a service called “operational utilisation – 15 minutes”.
In this situation, your client’s battery must charge or discharge to alter the amount of electricity the site takes from or sends to the grid within 15 minutes of receiving the instruction from NGED.
Your client doesn’t receive a payment for being ready to react. They only get paid when GridVolt arranges for their battery to charge or discharge as NGED requests.
Can my client earn money by charging their battery when NGED needs more electricity used locally?
Yes. GridVolt can arrange for your client’s battery to charge when NGED is paying sites in their area to take more electricity from the grid. NGED calls this demand turn-up.
Via its FlexUp service, the firm pays for increased electricity use so nearby renewable generators can keep producing electricity instead of having to reduce output or switch off altogether. GridVolt keeps charging, staying within the battery’s storage capacity and the site’s limit on how much power it can take from the grid.
NGED’s September 2026 tender also introduced local voltage management in targeted low-voltage areas. Depending on what NGED needs locally, GridVolt may be able to arrange for the battery to charge and take more electricity from the grid, or supply the site so it takes less.
Can my client get paid to charge their battery before a storm?
Potentially. NGED’s Responder service asks customers to use electricity earlier than they normally would, before a forecast storm takes place.
Your client’s battery could charge up earlier, ready to supply their site later with power when NGED needs sites to take less electricity from the grid.
NGED plans to use Responder between September 2026 and March 2027. It selects participants through a separate bidding process, so GridVolt checks whether your client can join this service before you include potential earnings in your sales proposal.
How do I know whether my client’s battery is suitable for NGED flexibility?
Send us your client’s site postcode, the MPAN from their electricity bill, and battery and inverter make and model.
Our first check will be to see whether the site connects to s part of NGED’s network where it needs flexibility. We’ll get a good idea from the postcode, but we’ll need confirmation from NGED about whether your site connects to the actual network. You may have two clients very closeby but NGED may need flexibility at one site but not the other because they connect to different parts of its network..
Unlike many NDOs, NGED publishes no minimum asset size. That means a smaller commercial battery may therefore be suitable to join. The key issue however is how much power it can offer to NGED after setting aside electricity you use on your own site.
Our next check is whether the battery and inverter can charge or discharge at the power level NGED needs, quickly enough and for long enough.
NGED needs your client’s equipment to sustain a response for at least 30 minutes. That means keeping up the increase or reduction in electricity taken from or sent to the grid for the full half-hour. Some NGED trades require the battery to keep this up for longer, so we check the full time required before offering your client’s battery.
We can assess the proposed equipment while you’re preparing your quote. Your client can only complete NGED’s equipment registration once you’ve installed and connected it, with the electricity supply switched on.
How can I get my client into NGED flexibility services?
GridVolt can handle the setup, trading and paperwork for your client. You install the battery, inverter and metering, while we manage the setup, trading and paperwork for your client.
If your client wants to deal directly with NGED, they have to:
- Register their company on Market Gateway
- Complete the commercial checks
- Accept NGED’s agreements
- Register their equipment for technical approval
This is only the beginning however. They would then need the knowledge and software to make offers to NGED, charge and discharge their batteries in line with the hours and power levels NGED has agreed to buy and provide meter readings showing how much electricity the site actually took from or sent to the grid. The next step after that is to use the Flexible Power Portal to record what the site delivered and calculate payments.
It’s complex, so most companies leave this to an aggregator like GridVolt. Your client’s equipment stays at their site, and we control charging and discharging remotely through our virtual power plant, or VPP.
How much could my client earn from NGED flexibility?
GridVolt can estimate your client’s potential earnings by using their meter readings, electricity tariff and the battery power they can spare. How much they’ll receive depends on:
- Which NGED services need their battery and where the site connects to the grid
- How much power they can offer and for how long
- The payment rates and how often NGED uses the battery
- The commissions agreed with your company and GridVolt
Not all trades result in income. Some can lose money if taking part increases their energy costs. For example, using stored electricity for NGED in the afternoon could leave your client buying more expensive grid electricity that evening. The payment needs to cover that extra cost and leave them better off. We always perform these check in advance.
NGED’s published ceiling prices are the most it will accept for an opportunity, not a forecast of your client’s earnings. Ask GridVolt for a site-specific estimate before quoting income in your proposal.
My client is in the NGED area. What opportunities are there near them?
Our database recorded the following opportunities on 7 October 2026. The availability and utilisation entries are forecasts for 2027/28. Send GridVolt your client’s postcode and MPAN so we can check current opportunities and whether their site connects to the relevant part of NGED’s network.
| Location and network zone | Service | Dates |
|---|---|---|
| Birmingham (Bartley Green BSP) | Availability + utilisation | April 2027 to March 2028 |
| Bristol (Feeder Road A Primary) | Availability + utilisation | April 2027 to March 2028 |
| Nottingham (Nottingham East BSP) | Availability + utilisation | April 2027 to March 2028 |
| Exeter (Exeter to Sowton Tee) | Availability + utilisation | April 2027 to March 2028 |
| Swansea area (Lime Street and Garngoch group) | Availability + utilisation | April 2027 to March 2028 |
| Loughborough | Availability + utilisation | April 2027 to March 2028 |
| Hereford and Ledbury (Hereford–Ledbury Ring) | Availability + utilisation | April 2027 to March 2028 |
| Taunton and Culmhead (Taunton to Culmhead Tee) | Availability + utilisation | April 2027 to March 2028 |
| Tavistock (Tavistock Primary) | Availability + utilisation | April 2027 to March 2028 |
| Keynsham (Keynsham East Primary) | Availability + utilisation | April 2027 to March 2028 |
| Clevedon (Clevedon Primary) | Availability + utilisation | April 2027 to March 2028 |
| Lincoln (904181 Yarborough Road Lincoln) | Scheduled utilisation | Weekdays, 11 January 2027 to 29 February 2028 |
| Llanharry (542501 The Elms Llanharry) | Scheduled utilisation | Weekdays, 4 January 2027 to 31 March 2028 |
| Portishead (182936 Sanderling Place Portishead) | Scheduled utilisation | Weekdays, 11 January 2027 to 29 February 2028 |
| Draycott (873938 Derby Road Draycott) | Scheduled utilisation | Weekdays, 11 January 2027 to 29 February 2028 |
What documents do I need to sign my client up for NGED flexibility services?
Send GridVolt the client’s site postcode, a recent electricity bill and the battery and inverter make and model. This can be for a battery you’re planning to install or one that’s already running.
For the full assessment, we’ll also need:
- Twelve months of meter readings showing how much electricity the site took from the grid in each half-hour, plus readings for electricity sent to the grid where available.
- The current import tariff and export agreement.
- The proposed or installed battery’s power in kW, usable storage in kWh and any solar capacity.
- The maximum power the site is allowed to take from or send to the grid, plus any other restrictions in its connection agreement.
- The power and stored electricity your client needs to keep for backup or other site uses.
Send the single-line diagram and details of the existing controller and meter if you have them. You don’t need every item before you get in touch.
GridVolt can then assess the equipment and estimate the bill savings and potential income from the trading options we confirm are available to that site. We’ll send you figures you can use in your proposal, and you keep the installation work and client relationship.
Related questions
- How do flexibility markets for UK Power Networks work and how can I sign up my clients?
- How do flexibility markets for SP Energy Networks work and how can I sign up my clients?
- How do flexibility markets for SP Electricity North West work and how can I sign up my clients?
- How do flexibility markets for SSEN work and how can I sign up my clients?