Download UK Commercial Battery Trading 2026 Whitepaper

Updates

Reserve Services: Earn Income By Helping The Network Balance Supply And Demand

Thomas Hayes

Find out what the reserve service market is, how you can take part in it, and how much income your company may earn.

You may already save money on your electricity bills by storing solar power or electricity drawn down at off-peak rates for use when prices are higher. You could also earn money through flexibility markets, including reserve services. Here, you’re paid to keep your battery ready to supply your building or charge from the grid if the grid operator asks.

In this article, find out what the reserve service market is, how you can take part in it, and how much income your company may earn.

What are reserve services?

The National Energy System Operator (NESO) uses reserve services to arrange access to equipment like generators and batteries that it can call on to balance electricity supply and demand across Great Britain.

For example, if a power station unexpectedly stops producing power, NESO could then instruct other generators to supply more electricity or businesses to take less from the grid. If there’s more electricity available than needed to meet demand, it can arrange the opposite.

To take part in these trades, most businesses use an energy aggregator. They combine what your battery and those at other businesses can offer in a virtual power plant. They then submit offers to NESO and arrange for your battery’s controls to carry out any instructions.

Note: With reserve services, your battery’s controls act on instructions from NESO through your aggregator. With frequency response, the controls react automatically to changes in grid frequency.

What trades are available through reserve services?

Your aggregator can offer to reduce or increase the electricity your business takes from the grid. Your battery carries out the instruction while the equipment at your site you need to stay operational keeps running.

What NESO asks forWhat your battery could do
Take less electricity from the grid.Supply more of your building’s electricity, so less comes from the grid.
Take less electricity while the battery is charging.Reduce or pause charging, then finish later before you need the stored electricity.
Take more electricity from the grid.Charge the battery, storing electricity for later use.
Take more electricity while the battery is supplying your building.Reduce or stop discharging. The grid supplies more of your building’s electricity instead.

Taking less from the grid is positive reserve, while taking more is negative reserve.

DirectionWhat helps restore the balance
Positive reserveGenerators supply more electricity, or equipment takes less electricity from the grid.
Negative reserveGenerators supply less electricity, or equipment takes more electricity from the grid.

Which reserve services does NESO buy?

Your aggregator can offer positive reserve and negative reserve from your battery and site across these three types of trade.

ServiceWhat it involves
Balancing ReserveYour aggregator agrees the day before to keep battery power available during specified hours. If needed, NESO instructs it through the Balancing Mechanism.
Quick ReserveYour battery must reach the charging or discharging rate NESO requests within one minute of the instruction’s start time.
Slow ReserveYour battery has up to 15 minutes to reach the charging or discharging rate NESO requests.

For example, if NESO instructs your battery to charge at 100 kW from 2pm, Quick Reserve requires it to reach that rate by 2.01pm. With Slow Reserve, it has until 2.15pm. It must then continue at that rate for as long as the instruction requires.

Each service also has rules on how long the battery must keep charging or discharging and how soon it must be ready for another instruction.

Before entering a trade, your aggregator checks that your battery has enough stored electricity to supply your building, or enough empty space to charge, for the required time.

What does a reserve services trade look like?

Let’s say your battery has enough stored electricity to supply an extra 100 kilowatts (kW) to your building if NESO asks. Your aggregator groups it with batteries at nine other businesses, each able to do the same. Together, they can reduce electricity taken from the grid by 1,000 kW, or one megawatt (MW).

Your aggregator offers NESO a 1 MW reduction in the group’s grid use through Quick Reserve. It tells NESO when the batteries can provide that reduction and its price for keeping them available, and NESO accepts the offer through its auction.

During the agreed hours, NESO sends an instruction to reduce the group’s grid use by 1 MW, starting at 2pm. Your aggregator sends commands to the battery controls at all ten sites.

By 2.01pm, each battery supplies an extra 100 kW to its building. The businesses together take 1 MW less from the grid. At your business and the other businesses in the group, your machinery, lighting and other equipment continue working. Your aggregator maintains the reduction until NESO instructs it to stop, following the service’s timing rules.

How is the work measured?

Before the instruction, your aggregator submits a plan showing how much power the group expects to take from the grid. This is its operating baseline.

Suppose the businesses are due to take 2 MW between them. Once their batteries supply the extra 1 MW, they take 1 MW from the grid instead.

Your aggregator reports frequent meter readings to NESO. NESO compares these with the baseline and instruction to check how much less the group took, how quickly the reduction happened and how long it lasted.

How do you get paid?

For the auction contract in this example, there are two parts:

  • Keeping the batteries available. NESO pays the aggregator for the agreed power during the contracted hours, even if it never sends an instruction.
  • Using the batteries when instructed. A separate calculation covers the electricity supplied or used. Depending on the direction and price, the aggregator receives a payment or pays a charge.

Your aggregator passes on your agreed share after its fee and other agreed deductions. If the batteries aren’t available or fail to follow the instruction properly, the group can lose its availability payment for the affected period. Your agreement explains how any deductions affect you.

How much could your business earn from reserve services?

How much you earn depends on the money in the trade from NESO minus the aggregator’s fee, and the effect on your electricity bill.

In each of these three examples, ten businesses in a virtual power plant controlled by the same aggregator provide 100 kW each, making 1 MW, for two hours. Each receives one-tenth of the group’s payments, less a 20% aggregator fee.

Note: All prices and fees are assumed. They aren’t current rates, GridVolt terms or earnings forecasts. The Quick and Slow Reserve examples use NESO’s route for participants outside the Balancing Mechanism. We assume the equipment is already installed, all batteries remain available and follow the instructions correctly, and there are no extra fixed charges. Figures exclude VAT and tax.

1. Balancing Reserve: paid without using the battery

A business has electricity stored in its batteries that it won’t need between 2pm and 4pm. NESO has agreed to pay its aggregator to keep those batteries ready during those hours, so they can supply the building if needed.

It turns out that NESO sends no instruction at all, so the battery remains unused, but the aggregator receives the payment for keeping it available.

CalculationAmount
Group’s payment for being available1 MW × 2 hours × £10 = £20
Your business’s one-tenth share£20 ÷ 10 = £2
Aggregator’s 20% fee£2 × 20% = £0.40
Payment to your business£1.60

The battery stays unused, so the business’s electricity bill stays the same. It keeps the £1.60 payment after the aggregator’s fee.

2. Quick Reserve: supplying the building when instructed

A business has electricity stored in its battery that it won’t need between 2pm and 4pm. During those hours, NESO asks the group to take less electricity from the grid. The aggregator then instructs each battery to supply its own building.

Each battery supplies 20 kWh, so each business buys 20 kWh less from the grid. Across the ten businesses, that totals 200 kWh, or 0.2 MWh. At our assumed price of £100 per MWh, NESO pays the aggregator £20 for this, on top of the payment for keeping the batteries ready.

Afterwards, each battery recharges to replace the electricity it supplied. We assume 90% of the electricity bought for charging comes back out when the battery supplies the building. It therefore needs about 22.22 kWh from the grid to replace the 20 kWh. Electricity costs 20p per kWh throughout.

CalculationAmount
Group’s payment for being available1 MW × 2 hours × £10 = £20
Group’s payment for following the instruction0.2 MWh × £100 = £20
Your business’s one-tenth share£40 ÷ 10 = £4
Aggregator’s 20% fee£4 × 20% = £0.80
Payment to your business£3.20
Cost of replacing the stored electricity20 ÷ 0.90 × £0.20 = £4.44
Saving from buying less grid electricity during the instruction20 × £0.20 = £4
Overall benefit£3.20 − £4.44 + £4 = £2.76

The business saves £4 by using battery electricity instead of buying from the grid. Recharging costs £4.44, leaving an extra cost of 44p. After taking that from its £3.20 payment, the business is £2.76 better off.

3. Slow Reserve: charging earlier costs more than the payment

A business plans to charge its battery later, when electricity is cheaper at 10p per kWh. Through its aggregator, it agrees to bring that charging forward if NESO asks.

NESO asks the group to take more electricity from the grid. The aggregator instructs each battery to charge, taking an extra 20 kWh per site. Across ten businesses, that totals 200 kWh, or 0.2 MWh. Each battery then skips 20 kWh of charging planned for later.

For this instruction to take more electricity from the grid, a negative price means NESO pays the aggregator. At the assumed price of −£100 per MWh, that payment is £20 for the group, on top of the payment for keeping the batteries ready.

But each business pays 30p per kWh to charge during the instruction instead of 10p later. Buying those 20 kWh therefore costs £6 rather than £2, adding £4 to its electricity bill.

CalculationAmount
Group’s payment for being available1 MW × 2 hours × £10 = £20
Group’s payment for taking more electricity0.2 MWh × £100 = £20
Your business’s one-tenth share£40 ÷ 10 = £4
Aggregator’s 20% fee£4 × 20% = £0.80
Payment to your business£3.20
Charging during the instruction20 × £0.30 = £6
Charging later without the trade20 × £0.10 = £2
Extra electricity cost£6 − £2 = £4
Overall result£3.20 − £4 = £0.80 worse off

The business receives £3.20 but spends £4 more on charging, leaving it 80p worse off. This example shows why the aggregator needs to check electricity costs before submitting an offer. Knowing these costs, it would normally avoid the trade.

Each example covers two hours. What you earn over a year depends on how often NESO accepts your aggregator’s offers, the prices it accepts and your costs.

How can your business take part in reserve services?

To take part in the reserve services market, start off by contacting an aggregator.

1. Find an aggregator to assess your battery

Ask which of the reserve services the aggregator offers and whether its software can take control over your battery and inverter for trading purposes. Give it your equipment details and recent electricity-use data.

The aggregator checks:

  • How much power your battery can take from the grid or supply to your building.
  • How many seconds or minutes it takes to reach the charging or discharging rate NESO requests.
  • How long it can run at that rate before filling up or running out of usable electricity.
  • Whether your meters can provide the readings needed to check delivery.

Your battery doesn’t have to meet the 1 MW minimum on its own. An aggregator can group it with batteries at other businesses and handle the offers, instructions and payments, so you don’t need your own trading team.

You can work with an independent aggregator while keeping your electricity supplier. The aggregator will check who your existing contract is with as part of the sign-up process.

2. Agree when and how your battery can be used

Tell your aggregator how you use your battery during a normal working day. You might need stored electricity for the morning shift, to avoid buying expensive electricity later or to keep a reserve for backup. If you have solar panels, explain what times of day you need space in the battery to store their electricity.

Some of the information your aggregator will gather includes:

  • Your battery’s charging and discharging limits and the conditions of its warranty.
  • How much power your site can take from or send to the grid. Charging the battery while machinery is running mustn’t take you over that limit.
  • Whether your local network operator can restrict battery use under a flexible connection agreement.

You then agree which equipment the aggregator can control, how much battery power it can offer NESO and during which hours. Specify how much stored electricity it must leave for your business and when you need it.

The aggregator should explain how it will recharge after an instruction to supply your building, or discharge to make space for further charging. It needs to prepare for another NESO instruction without leaving you short of electricity for your own work.

3. Check the agreement and complete the setup

Ask your aggregator how it will work out your share of the payments, what it will deduct and when you’ll be paid. Your statements should show the payments received, its fee and any other deductions.

Check whether you could lose payments or face charges if your battery:

  • Can’t supply electricity or charge when instructed.
  • Takes too long to reach the required charging or discharging rate.
  • Supplies too little electricity or takes too little from the grid.
  • Has missing or incomplete meter readings.

Tell the aggregator about any other trading or flexibility services you use. It needs to check that it isn’t offering battery power you’ve already agreed to provide elsewhere.

Agree who will report faults and planned maintenance, and how quickly they must do so. Also check how long the contract lasts and what you need to do if you want to leave.

Once you’ve agreed the terms and given permission, the aggregator arranges the necessary tests, metering, control connections and registration. It can then start submitting offers to NESO on your behalf.

Explore your flexibility market options with GridVolt

If you already have a solar + battery or battery-only setup in Great Britain, GridVolt can check your equipment and explain which trading opportunities could be available through GridTrade.

Energy Manager uses your tariff, electricity needs and expected solar generation to plan when your battery charges and supplies your building. An on-site controller passes data and instructions between the software and compatible equipment.

We’ll assess what your battery could provide for reserve services while keeping enough electricity for your own work. That includes checking the effect on your bill and what you could keep after fees and other deductions.

Fill out the form on the right or contact GridVolt to discuss your options.

Frequently asked questions

Are reserve services the same as the Capacity Market?

No. NESO uses reserve services to correct gaps between electricity supply and demand as they arise. The Capacity Market pays for a longer-term promise to have equipment ready to supply electricity or reduce grid use when Britain's electricity supplies are under pressure.

Both can pay for readiness, but they serve different purposes.