Download UK Commercial Battery Trading 2026 Whitepaper

Updates

Balancing Mechanism: How Your Business Could Earn From Helping Balance The Grid

Thomas Hayes

See how the Balancing Mechanism market operates in Great Britain, how trades in the market work, and how to take part in trading.

Many businesses earn extra income by selling their surplus electricity to the grid. There are also multiple other markets for companies looking to earn money from their batteries and other electrical equipment, one of which is the Balancing Mechanism.

Below, find out what the Balancing Mechanism is, how trades in the market work, and how to take part in trading.

What is the Balancing Mechanism?

The Balancing Mechanism, or BM, is used by the National Energy System Operator, or NESO, to balance electricity supply and demand across Great Britain at short notice.

Electricity producers, like power stations and wind farms, tell NESO how much more or less electricity they could supply. Individual businesses and groups of smaller businesses, acting through an energy aggregator, tell NESO how much more or less electricity they could take from the grid. Both give a price for making the change.

NESO then selects which bids and offers to accept, sending instructions informing:

  • Producers how much more or less electricity to supply and when.
  • Energy aggregators how much more or less electricity their customers should take from the grid and when.

So, at your site, the aggregator would instruct your battery setup to supply more of your building’s electricity to reduce what you take from the grid when supplies are tight or charge up by taking more from the grid to help use up surplus electricity.

When the trade is over, the aggregator collects any payment from NESO and passes on your agreed share after its fee.

Note: BM bears many similarities to the Demand Flexibility Service (DFS). DFS uses agreed event periods, like between 5pm and 5.30pm on Tuesday, whereas with BM, participants follow NESO’s operating instructions, often at short notice. Their registration, metering and payment rules also differ.

What trades are available through the Balancing Mechanism?

The two main trades available in Balancing Mechanism are taking less electricity from the grid and taking more. Here’s how this form of energy flexibility might work at different types of businesses:

Example businessWhat NESO needsWhat the battery could do
FactoryLess electricity taken from the grid.Supply more of the machinery’s power, so the factory takes less from the grid while production continues.
DepotLess electricity taken from the grid.Pause charging and complete it later, before the stored electricity is needed.
Cold storeMore electricity taken from the grid.Stop supplying refrigeration during the instruction. The grid supplies it instead, and the battery powers it later.
WarehouseMore electricity taken from the grid.Charge earlier instead of at another time, storing electricity for later work.

Here’s how it might work. Suppose you charged your battery from the grid overnight. It’s now supplying half the electricity your building needs, while the other half comes directly from the grid.

If NESO accepts a trade to reduce grid use for 30 minutes, your aggregator could instruct your battery to supply all your building’s electricity for that period. You then take no electricity from the grid during that half hour.

If NESO accepts a trade to increase grid use instead, your aggregator could stop the battery supplying your building for the agreed period. The grid supplies all the electricity your equipment needs, and you keep the stored electricity for later.

Your equipment keeps running as normal in both trades, with neither trade requiring you to send electricity back to the grid.

Note: Changing how much electricity you take from the grid at NESO’s request is one form of demand response.

What does a Balancing Mechanism trade look like?

Let’s say your site is one of twenty businesses in a virtual power plant via an energy aggregator. You and the other businesses could reduce the amount of electricity you’re taking from the grid by 50 kilowatts (kW), a combined reduction of 1,000 kW or one megawatt (MW).

The aggregator submits an Offer to reduce the group’s grid use by 1 MW, at a stated price and within its operating limits. NESO accepts, and instructs a steady reduction of 1MW for the next 30 minutes.

The aggregator instructs your battery and all the other batteries to supply an extra 50 kW each to their buildings, meaning each business takes 50 kW less from the grid for that half hour while its equipment keeps running as normal.

What are Bids and Offers, and who gets paid?

Your aggregator’s proposal to reduce the group’s grid use by 1 MW is an Offer. A proposal for the group to take more electricity from the grid would be a Bid.

Both bids and offers include a price. That price can be above zero (positive) or below zero (negative), which affects who pays whom:

TradeAt a positive (+) priceAt a negative (−) price
Offer: The group takes less electricity from the grid.NESO pays your aggregator.Your aggregator pays NESO.
Bid: The group takes more electricity from the grid.Your aggregator pays NESO.NESO pays your aggregator.

Your aggregator could pay NESO for a trade and still have money to share with you. That’s because your electricity supplier may owe it a separate payment for the same trade.

Here’s how this might work step by step, assuming you use an aggregator service not through your electricity supplier:

  1. Your batteries stop supplying your buildings for 30 minutes. Your equipment stays on as normal, but your site uses grid electricity for power rather than stored-up energy in your batteries.
  2. Your aggregator pays NESO £20 for that trade. This is the BM charge for the group’s increase in grid use.
  3. Your electricity suppliers still bill you for the extra electricity. Your business and all the other businesses involved in the trade pay your usual tariff for electricity taken from the grid.
  4. The electricity suppliers must also make a payment to your aggregator. Under the market’s accounting rules, the extra electricity you and the other companies drew belongs to the aggregator’s trade. The suppliers have billed their customers for it without having to buy that extra amount themselves. They therefore pay an amount to the aggregator, called supplier compensation.
  5. That payment uses a different price from the BM trade. The £20 charge uses the price your aggregator agreed with NESO. Supplier compensation uses a separate industry estimate of electricity purchase costs. In this example, the suppliers pay your aggregator £30 between them.
  6. Your aggregator has £10 left before its fee and other costs. It has received £30 from the suppliers and paid £20 to NESO.

In this situation, you also have the stored battery electricity you can now use later. If your tariff is the same in both periods, you buy more electricity now and the same amount less later. Your total electricity bill stays the same, and you haven’t added another battery charge-and-discharge cycle.

Even when your aggregator pays NESO for a trade, there may still be money left to share between you, the other businesses, and the aggregator. Your share will be subject to fees and other costs agreed in advance with your aggregator.

How is delivery checked?

In this example, your aggregator checks whether the group took the actions requested by NESO by comparing meter records with the group’s expected grid use.

Before the trade, it sends NESO a Final Physical Notification (FPN). This is a plan showing how much electricity you and the other sites would take from the grid if there was no BM instruction.

Let’s say 20 sites in a group were expected to take 2 MW from the grid. NESO asks for a 1 MW reduction for 30 minutes, so the group should take 1 MW during that half hour.

During the trade, NESO receives frequent updates showing how much power the group is taking from the grid. It uses these to check whether the group is following its instruction.

Afterwards, your aggregator uses meter records to check how much electricity each business took from the grid over the half hour.

Elexon, the organisation that manages the BM’s payment and charging calculations, works out the BM payment using the agreed price and the 1 MW reduction NESO requested for that half hour. If the group doesn’t cut its grid use by the agreed amount, your aggregator may have to pay a charge.

How much could your business earn from the Balancing Mechanism?

What you keep from a trade depends on your share of the money, your aggregator’s fee and any extra electricity costs or battery wear. Your earnings over a year also depend on how often NESO accepts trades involving your business.

Suppose your business is one of twenty taking part in a 30-minute trade. Each business agrees to take 50 kW more or less electricity from the grid. Over that half hour, this amounts to 25 kilowatt-hours (kWh) per business.

Across the twenty businesses, that is 500 kWh, or half a megawatt-hour (MWh). BM prices are quoted per MWh.

To work out each business’s payment, we assume:

  • The aggregator splits the money left after supplier compensation equally between the twenty businesses. Each receives 5%.
  • The aggregator keeps 20% of each business’s share as its fee.
  • Supplier compensation is calculated at £60 per MWh.

The prices and fees are examples to show how the payments work.

We assume the equipment is already installed and every business does what NESO asked. There are no extra market fees or fixed charges.

The calculations exclude VAT and tax. We don’t adjust the payments for electricity lost as it travels through the high-voltage grid.

1. A factory pauses battery charging

The factory was due to buy 25 kWh to charge its battery at 10p per kWh, costing £2.50.

For the BM trade, it pauses charging for half an hour. It completes the same charge later, still at 10p per kWh, before it needs the stored electricity. Its machinery keeps running throughout.

When grid use falls, the aggregator pays supplier compensation. This covers electricity the supplier had bought for that period but didn’t sell.

Payment or deductionCalculation
BM payment for the group at an Offer price of +£100/MWh0.5 MWh × £100 = £50
Supplier compensation paid by the aggregator0.5 MWh × £60 = −£30
Amount left for the group£50 − £30 = £20
Factory’s 5% share£20 × 5% = £1
Aggregator’s 20% fee£1 × 20% = −20p
Cash paid to the factory80p

The factory still spends £2.50 charging its battery and adds no extra battery use. On these assumptions, it is 80p better off.

2. A cold store uses its battery electricity later

The cold store’s battery would normally supply 25 kWh during the half-hour. Instead, the grid supplies that electricity, and the battery supplies the refrigeration later.

At 30p per kWh in both periods, the cold store buys £7.50 more electricity now and £7.50 less later. Its total bill and battery use stay the same.

For this trade, the aggregator receives both a BM payment and supplier compensation.

Payment or deductionCalculation
BM payment for the group at a Bid price of −£100/MWh£50 received
Supplier compensation received by the aggregator0.5 MWh × £60 = +£30
Amount available for the group£50 + £30 = £80
Cold store’s 5% share£80 × 5% = £4
Aggregator’s 20% fee£4 × 20% = −80p
Cash paid to the cold store£3.20

With no increase in its electricity bill or battery use, the cold store is £3.20 better off.

3. A warehouse receives a payment but loses money overall

The earlier trade that left the aggregator with £10 would give the warehouse a 5% share of 50p. After the 20% fee, it receives 40p.

But suppose the warehouse would normally buy 25 kWh to charge its battery at 15p per kWh, costing £3.75. Bringing that charge forward to a period costing 25p per kWh raises the cost to £6.25.

That adds £2.50 to its bill. Despite receiving 40p, the warehouse is £2.10 worse off. On these terms, the aggregator shouldn’t put that trade forward for the warehouse.

How can your business take part in the Balancing Mechanism?

You join through a provider that checks your battery can follow BM instructions and puts the registration, controls and metering in place.

1. Find a provider to assess your battery

Ask which registered company would submit your Bids and Offers. An independent provider can register and qualify as a Virtual Lead Party (VLP) to submit BM trades. Working in the wholesale market doesn’t, by itself, give a provider BM access.

For the standard supplier and VLP routes, the registered unit can cover one site or a group of sites and needs at least 1 MW of power. An aggregator can combine smaller sites, so your battery doesn’t have to provide that whole amount or store 1 MWh.

Sites grouped into one registered unit through an independent provider must be in the same electricity-market region. This is called a Grid Supply Point (GSP) Group. These regions can differ from the areas used by the Demand Flexibility Service and local network operators.

The provider checks how much power your battery can supply or take while charging, how quickly it can reach that level and how long it can keep going. BM instructions can last more or less than 30 minutes.

2. Agree what must remain available for your business

Tell the provider when your business needs its stored electricity, how much must be kept in reserve and when you need room to charge. The provider checks your battery’s operating and warranty limits and the power your site is allowed to take from or send to the grid.

You agree which equipment it can control and when. Also agree how to report planned downtime or unexpected faults, and who can request changes before your provider commits your battery to a trade.

3. Complete the control, metering and payment checks

The provider checks that it can control your battery and send NESO regular updates during a trade. It also checks that your meter records meet the BM’s payment rules. Having a smart meter doesn’t, by itself, mean your setup meets all these requirements.

Check how supplier compensation, fees and other deductions affect your payment, when you’ll receive it and what happens if your battery can’t do the agreed work. The registered company must meet the BM’s market rules. Your contract should explain what you must do and which charges you could have to pay.

The provider also checks your supply and export contracts and any other service agreements for conflicts. With your permission, it completes the required registration before including your battery in BM trades.

Does your location affect which BM work you can provide?

Yes. Your location can affect whether NESO accepts your aggregator’s trade.

For example, wind farms in one area might produce more electricity than the power lines can carry elsewhere. NESO could accept a Bid for batteries in that area to charge. This uses more electricity locally, so less needs to travel along those lines.

Charging batteries elsewhere might not reduce the amount those particular lines have to carry.

NESO considers these local needs alongside the trade’s price and how quickly your battery can respond.

What other electricity markets and flexibility services are available?

Other options within the wider flexibility market have different buyers, requirements and payment arrangements.

  • Demand Flexibility Service. Take more or less electricity from the grid during agreed periods arranged through a registered provider.
  • Local flexibility markets. Supply electricity or use more or less to help your local network operator manage pressure on its network.
  • Frequency response services. Charge or supply electricity automatically within seconds to help keep the electricity system steady.
  • Reserve services. Keep suitable equipment ready to supply electricity or use more or less when NESO requests it.
  • Capacity Market. Keep equipment ready to supply electricity or reduce grid use when Britain’s electricity supplies are stretched.
  • Wholesale electricity market. Sell electricity from your battery through a trading arrangement, earning from the trade.

How can GridVolt help you assess your battery?

If you already have a solar + battery or battery-only setup in Great Britain, GridVolt can assess whether your battery could earn from the Balancing Mechanism. It can explain the trading options available to your site through GridTrade.

Energy Manager uses your tariff, electricity needs and expected solar generation to plan when your battery charges and powers your business. An on-site controller passes data and instructions between the software and compatible equipment.

We’ll check what your battery could offer while keeping enough electricity for your own work. That includes looking at the effect on your bill and what you’d keep after deductions.

Fill out the form on the right or contact GridVolt to discuss your options.

Frequently asked questions

Is the Balancing Mechanism the same as DFS?

No. The BM and Demand Flexibility Service, or DFS, can use similar battery actions, but their registration, instructions, measurement and payment rules differ. Taking part in DFS doesn’t establish BM access.

Does submitting an Offer guarantee it will be used?

No. NESO accepts the work it needs. Signing up or making your battery available doesn’t guarantee regular instructions or income.

Why isn’t an FPN used for every delivery comparison?

Eligible units can choose the P376 baselining arrangements. They use an approved estimate of expected electricity volumes for the relevant delivery checks, while still submitting an FPN for NESO’s operational use. Our examples use the standard FPN comparison instead.

What happens with a negative Offer price?

With a negative Offer price, the registered company pays for the accepted reduction in grid use. You need to know both the price’s sign and whether the action is a Bid or Offer to understand which way the money flows.

Recommended links

Recommended links for installers