Find out how local flexibility markets work, why your electricity connection matters and what you need to be able to take part in trades.
Demand for electricity supply varies throughout the day, creating problems for local operators like UK Power Networks and Northern Powergrid. They may pay you to use less grid electricity during busy periods, charge your battery when there’s a surplus, or supply electricity back to the grid when needed.
In this article, find out what the local flexibility market is, what taking part in it requires, and how to take part in trades.
What are local flexibility markets?
Electricity network operators pay businesses to help prevent cables and substations becoming overloaded via a local energy flexibility market.
For example, on a busy evening, lots of homes and businesses may need electricity at once so they pay you to draw power from your battery instead. On the other hand, solar panels could be sending too much power onto the grid, so they could pay you to charge your battery or run suitable equipment to use some of that electricity locally.
Network operators are different from electricity suppliers. Network operators manage the network serving your area, while electricity suppliers sell you power and send you a bill.
You can arrange this work through an energy aggregator, a company that deals with the local network operator on your behalf, like GridVolt. It agrees to the work and arranges for your equipment to carry it out. It also collects the payment and passes on your share after its fee.
What trades are available in the local flexibility market?
Here’s what trades in the local flexibility market might look like for different types of businesses:
| Example business | What the operator needs | What the business could do |
|---|---|---|
| Courier depot | Less grid electricity used during a busy evening. | Pause EV charging, then finish charging later so the vehicles are ready for their next shift. |
| Leisure centre | More electricity used during a period of surplus local generation. | Heat water earlier and keep it in insulated tanks for showers later. |
| Factory with a battery | Less electricity drawn through an overloaded local substation. | Use stored electricity to keep machinery running, reducing the factory’s need for grid power. |
| Warehouse with solar panels | Less solar electricity flowing onto the local network. | Temporarily turn down surplus solar generation when the warehouse can’t use or store it. |
| Business with a suitable generator | Additional electricity supplied locally during a busy period. | Run the generator to power the site or supply electricity to the grid, where permitted. |
What does a local flexibility trade look like?
In local flexibility markets, you can be paid for:
- Being ready: Keeping the equipment you’ve agreed to make ready during set hours. You can still receive a payment even if, in the end, the operator doesn’t need to use your equipment.
- Taking action: When the local network actually uses the equipment which it provides with the help requested, like drawing power from your battery for an hour so you take less electricity from the grid.
Here’s the breakdown for each local network operator, with information sourced from their published service guides, tender documents and contract terms:
| Operator and area covered | Payment for being ready | Payment for taking action |
|---|---|---|
| UK Power Networks: London, the East of England and the South East. | Keep your equipment ready during the hours agreed in your contract. | Make an agreed change at a set time. For some services, the operator confirms what’s needed the day before. |
| National Grid Electricity Distribution: East and West Midlands, South West England and South Wales. | Keep your equipment ready during the hours agreed in your contract. | Make a planned change, or respond at short notice to help after a network fault. |
| Northern Powergrid: North East England, Yorkshire and northern Lincolnshire. | Some services pay for keeping equipment ready during the hours agreed in your contract. | Make an agreed change at set times. For some services, your aggregator receives the following week’s requests in advance. |
| SP Energy Networks: Central and southern Scotland, North Wales, Merseyside, Cheshire and North Shropshire. | Keep equipment ready during the hours agreed in your contract. Some services allow those hours to be adjusted nearer the time. | Make a change arranged in advance, or respond to a request at short notice. |
| SP Electricity North West: North West England, including Cumbria, Lancashire and Greater Manchester. | During the hours agreed in your contract, with the required hours confirmed the week before. | Make an agreed change at set times, or respond when the operator calls. |
| Scottish and Southern Electricity Networks (SSEN): Northern Scotland, including the islands, and central southern England. | Keep equipment ready during the hours agreed in your contract. Some services allow those hours to be adjusted nearer the time. | Make an agreed change at set times, or respond to a request at short notice. |
Here’s how it works out what to pay you:
- Being ready: The operator calculates the payment using the amount of power you’ve agreed to make available, the hours covered and the agreed rate.
- Taking action: It uses meter readings to work out how much help you provided. Where required, it compares these with an agreed estimate of what your site would have used or supplied without taking part. For example, if you were expected to take 100 kWh from the grid during an hour but took 70 kWh, the 30 kWh reduction is used to calculate the payment.
Your aggregator receives the money and passes on your agreed share after its fee.
How much could your business earn from local flexibility?
What your business gains depends on the payment, your aggregator’s fee and whether taking part raises or lowers your electricity costs.
Here are three modelled examples using assumed rates and a 20% aggregator fee. They aren’t earnings forecasts, and they assume the equipment is already installed.
1. A factory is paid to keep its battery ready
A factory agrees to keep its battery available during 80 hours over a month. For the amount of power it promises, the operator agrees to pay £1 for each hour it’s ready.
The operator doesn’t need to call on it. The battery would otherwise be unused during those hours, so keeping it ready doesn’t cost the factory any bill savings.
| Calculation | Amount |
|---|---|
| Payment for being ready for 80 hours at £1 an hour | £80 |
| Aggregator’s 20% fee | −£16 |
| Factory is better off by | £64 |
2. A courier depot is paid to pause vehicle charging
The local operator asks for less grid use during a busy hour. The aggregator pauses the depot’s EV chargers, reducing the electricity it takes from the grid by 100 kWh.
At an assumed payment rate of 50p for each kWh of reduction, the operator pays £50.
The vehicles still need charging afterwards. Moving the charging raises its electricity cost from £30 to £45, so taking part adds £15 to the depot’s bill.
| Calculation | Amount |
|---|---|
| Payment for reducing grid use by 100 kWh at 50p per kWh | £50 |
| Aggregator’s 20% fee | −£10 |
| Extra cost of charging later | −£15 |
| Courier depot is better off by | £25 |
3. A business is paid to keep its battery ready and use it
Another business agrees to keep its battery available for 80 hours, earning £80 at the assumed rate of £1 an hour.
During the month, the operator asks for less grid use for one hour. The aggregator instructs the battery to power the business’s equipment, supplying 90 kWh. At an assumed rate of 50p per kWh, this earns another £45.
Using the battery also avoids buying those 90 kWh from the grid at 40p per kWh, saving £36 on the bill.
Charging the battery costs £15. That buys 100 kWh at 15p per kWh, with 90 kWh reaching the equipment after the assumed 10% electricity losses.
| Calculation | Amount |
|---|---|
| Payment for keeping the battery ready | £80 |
| Payment for reducing grid use | +£45 |
| Total operator payment | £125 |
| Aggregator’s 20% fee | −£25 |
| Saving from avoiding expensive grid electricity | +£36 |
| Cost of charging the battery, including losses | −£15 |
| Business is better off by | £121 |
How can your business take part in local flexibility trading?
Follow these three steps to take part in the local flexibility markets:
1. Survey your current equipment
At a minimum, you’ll need equipment that can supply electricity or be paused, slowed down or run at another time to participate in trades, like:
- Battery/suitable generator: These can power your machinery while you take less electricity from the grid.
- EV chargers: If you have, for example, on-site EV charging for your depot, stop charging up during times you agree with the provider while ensuring there’s still enough time to charge your fleet up.
- Electric water heaters: Heat water before a busy period and outside agreed hours, keeping it in insulated tanks so there’s still hot water for your showers or other uses.
Identify what you can use and then approach an aggregator.
2. Find an aggregator to assess your site
Approach a selection of different aggregators to see which ones work with your local network operators and whose software is compatible with your on-site equipment.
The aggregator works out how much your equipment could provide and for how long. With a battery, it needs to know both how much electricity it stores and how quickly it can supply it.
If your business can’t provide enough on its own, the aggregator may be able to combine your contribution with other sites in the same network area, where the service allows it.
It also checks whether your equipment can receive instructions and whether your meter can provide the readings needed to confirm what happened.
There are certain constraints the aggregator will factor in like:
- Equipment operating limits: The temperatures your cooling or water-heating equipment must maintain, for example, or how long a machine can safely pause.
- Warranty conditions: Whether taking part would stay within the manufacturer’s warranty, including any limits on how often a battery can be charged and discharged.
- Grid issues: How much electricity your site is allowed to take from or send to the grid at once, and whether the proposed work stays within those limits.
The aggregator can then tell you which local services you could take part in and what, if anything, needs changing at your site.
3. Agree what equipment your aggregator can control
Tell the aggregator how you operate your site, particularly what equipment you need running and when. Your cold stores might need to keep running around the clock, or your battery might need to keep enough electricity for the morning shift.
You can then agree which equipment its software may control, when it can use it and what it must leave available for you.
Check the aggregator’s fee or the percentage of each payment it keeps, so you know how much you’ll receive. Also ask how long you’re signing up for and how you can leave.
Once the setup is live, then your aggregator can arrange trades with your local network operator and send instructions to your equipment within the limits you’ve agreed. It collects the operator’s payments and passes on your share after its fee.
Why does your site's location matter?
Because taking less electricity only helps if it eases the load on the part of the network that's under pressure. A business elsewhere in the same town might be connected to different cables, so doing the same thing there wouldn't necessarily help.
The operator will tell you where it needs help, often by naming a flexibility zone. Some services cover a wider area. A postcode search can give you an initial idea, but your operator or aggregator needs to check the actual connection. They'll use the Meter Point Administration Number, or MPAN, on your electricity bill to identify it.
What other flexibility markets are available?
Other electricity markets and flexibility services may also be available, depending on your site and provider.
- Demand Flexibility Service: You can receive payments for taking more or less electricity from the grid during agreed periods.
- Balancing Mechanism: Your provider can offer a short-notice change in how much electricity your battery supplies or takes from the grid.
- Frequency response services: Your battery can automatically charge or discharge within seconds to help keep the electricity system’s frequency steady.
- Reserve services: Your provider can keep battery power ready to respond when NESO calls, subject to the service’s response times and other requirements.
- Capacity Market: You can earn for keeping equipment available to supply electricity or reduce grid use when Britain’s supplies are stretched.
- Wholesale electricity market: Your trading provider can sell electricity from your battery through the wholesale market when a trade is worthwhile.
How GridVolt helps you take part in flexibility trading
Local flexibility markets aren’t the only way to earn from your battery. If you have a solar + battery or battery-only setup in Great Britain, you could take part in the Demand Flexibility Service (DFS) through GridTrade, subject to GridVolt checking your equipment, meter and electricity contracts.
Our Energy Manager software updates its forecasts 96 times a day to plan when your battery charges and powers your business. It also helps work out how much battery capacity could be available for trading after your own electricity needs are covered.
Fill out the form on the right or contact GridVolt to discuss your options.
Frequently asked questions
Does a published requirement mean you can still bid?
No. A record can show that help is needed next month even though the deadline for offering to provide it has passed. Check the current deadline with the operator or provider, rather than relying on an old 'live' label.
Are local flexibility services only available in winter?
No. Operators can buy flexibility throughout the year, though some work is seasonal. Check the dates and hours of the service you're considering. A winter requirement in one area doesn't tell you when work is available elsewhere.
Are local services the same as NESO's former Local Constraint Market?
No. Local network operators buy the services covered here. NESO, the National Energy System Operator for Great Britain, ran the separate Local Constraint Market to manage pressure on the national network.
That work moved into the Demand Flexibility Service from 7 October 2026. Having offered the former LCM service doesn't prove a provider can arrange services for your local network operator.
Recommended links
- The Flexibility Market And Your Business: How To Take Part and Earn
- Battery Energy Trading: How It Works and What You Can Earn
- Commercial Battery Storage UK: Costs, ROI & How It Works
- Can Battery Buffered EV Charging Replace A Grid Upgrade?
Recommended links for installers
GridVolt newsletter
A monthly email from GridVolt on energy optimisation, flexibility markets and what we're learning from our sites. Unsubscribe at any time. See our Privacy Notice.